Downloads
Tuning Software and Support Files
NIStune main application software. Requires registration.
RELEASE
NIStune
Version 0.9266a (EXE)
Released 8 Sep 2008
- Package update from 0.9266 for Type 1 USB FTDI drivers
not detecting as a USB serial port
- TPS switch setting for wideband tracing cut enabling
- Selection of AFR or Lambda for fuel maps and all AFR inputs and logging
- Z32 Extra fan control table address file support
- Injector latency calculation fix
- GTR VQ map half size option
- Customisable consult registers on grid display windows
BETA
NIStune
Version 0.9267 (EXE)
Released 12 Sep 2008
- Fixed up VE scaling (Affects S14/U13 KA24DE, ER34, N15A etc)
- Remove PWR_STEER from Type 1 board log playback appearing
- Fix up VQ Map detection for some ECU types, Added U13 KA24DE VQ Map
- Update consult parameter display window to fit large register names
- DTC code scrolling fixed
- Add Delta for knock/main maps
- Add various new address file parameters (See updated ROM pack address files
1.4.2 and later)
- NOTE: VEMS and JAW wideband implementations not tested yet. Didn't get to
finish this release!
NIStune
Version 0.9271 (EXE)
Released 28 Sep 2008
- JAW wideband implementation completed
- VEMS wideband completed!
- Added extra wideband folders and lookup tables for all supported units
- Fix for 8 bit O2 sensor feedback switch flag display
- Fix for J30 VG30E ROM file size causing sync issue and various consult
reporting issues
- Fix for consult raw display issue
- Extra tables added for maptracing
- Fixed reversed lambda reporting on AFR tables and wideband
NIStune
Version 0.9273 (EXE)
Released 14 Nov 2008
- Update for N13 CA18 TPS register
- Speed Limiter fix (broken in 0.9271)
- Speed trial includes Speed Trigger and RPM triggering
- Added new N15 512 address file
- Changes for Z31 fuel temperature adjustment
- RPM limiter fix (from 0.9272 version)
NIStune
Version 0.9275 (EXE)
Released 3 Dec 2008
- Fix for VE table display options
- Fix for filtered graphical view option with timing offset options
- KA24E AFM display fix
- N15A GA16DE VTC extra support parameters added
- Allow writing direct outside address file range
NIStune
Version 0.9.3 (EXE)
Released 17 Dec 2008
- Fix for Changing settings in log (display reg) doesn’t refresh window
- Fix for Recording and then playing doesn’t work. Need to reopen file in log dumper
- Fix for LC-1 recording 2x actual AFR (lambda)
- Fix for check s15 rev lmiit
- Fix for Crash when DLP used (mux error when strings in consult used)
- Fix for DLP USB not syncing with USB consult on VL
- Fix for Log player doesn’t get right to end of log. Improve logger interface
- Fix for Log player crash in 120DPI on dell
- Fix for Handle 800x600 on EEEpc better. Scroll bars etc on lists cant get everything
- Fix for Add imperial conversion to main speed guage and speed limiters
- Fix for legacy AFM K constant adjustment
- Fix for S14 and Z32 consult drops out during active tests
- Fix for ER34 injection time voltage double actual
- Fix for Not showing techedge 1.5
- Fix for Alpha not going over 100%
- Fix for Detonation ign retard should be 8 bit not 16
- Added Z32 copy to 5th gear maps button
- Added Auto save feature so you can recover next time startup
- Added Add limits to AFR plotter (min, max TPS, speed triggering, RPM max)
- Added Dual maf option for Z32 and GTR skyline
- Added Auto Resettable peak needles. Resets after 3 seconds
- Added 16 bit map trace on ER34 etc ECUs
- Added Hardware maptrace in hex editor view
- Added Add extra param checks for autotune (TPS, RPM, TP limits)
- Added Duty cycle measurement
- Added Percentage changed on the VQ map (use compare two maps to see delta with
comparison ticked)
- Added more address file entries
NIStune
Version 0.9.3.1 (EXE)
Released 17 Dec 2008
- Fixed up address file entry for additional fuel and injection response
NIStune
Version 0.9.3.2 (EXE)
Released 20 Dec 2008
- Idle/Decel Timing table fixes
- Filtering fixes for tables
- D21 KA24E added to Nistune
- Fixes for consult reporting S13 KA24E and table display
NIStune
Version 0.9.3.3 (EXE)
Released 20 Dec 2008
- Hardware maptrace fix on hex screen for 16KB ECUs
NIStune
Version 0.9.3.4 (EXE)
Released 20 Dec 2008
- RAM tracing fix and additional address file parameters added for hardware code
map trace
Excell
Spreadsheet of fixes and work here (XLS)
NOTE: Each version currently has 90 day usage
period which resets when a later version is downloaded and installed from here.
This is done so people don't run with older versions for too long as we frequently update the software with fixes and new features.
For single use trial run enter the following for
registration name: trial / email: trial
Address and ROM files
NIStune
ROM File Pack 2.0 (EXE)
Released 13 Dec 2008
* Note: Uninstall previous ROM packs and address directories before installing this one
to make sure you have the latest
* Note: New address file entries will require latest Nistune software to support
new tables etc added
* Important: Use map copy feature rather than sync when pulling tunes from older
saved images when using updated address files (new parameters added may not have
your last synced data and may show up as empty FFs in entry fields)
- Contains revised Address files for NIStune
- Contains an updated database of ROM files for various Nissan ECUs
- Contains ENT base image files for use with NIStune programmer (Type 1-4 now
supporting PIN lock firmware)
NIStune
ROM File Pack 1.4.2 (EXE)
Released 8 Sep 2008
(Uninstall previous ROM packs and address directories before installing this one
to make sure you have the latest)
Base Image Programmer Board
NIStune
NTProg Version 1.2.1 (EXE) - Release 10 July 08 (1.2.1 has a fix for the
diagnostics window)
NOTE: Only for reprogramming NIStune boards with a NIStune programmer
Type 1 Diagnostic Utilities
Microsoft USB View (ZIP) -
For identifying which USB devices are physically connected to your laptop
FTDI Clean (ZIP) - For uninstalling and cleaning
out FTDI drivers
Emulator upgrades