News & Developments
Vacation during September
6th of September, 2011
Matt will be on vacation during September and have occasional internet access. Please restrict communications where necessary
PLMS will handle orders but be aware this will be in limited capacity
6th of September, 2011
Matt will be on vacation during September and have occasional internet access. Please restrict communications where necessary
PLMS will handle orders but be aware this will be in limited capacity
Website updates and ROM pack 2.3 Release
30th of July, 2011
Website has been updated with ECU part lists added, extra modification documents for R33 Skylines (Z32 ECU install and using R32 GTR ECU in an R33 guide) and general information updates
ROM Pack 2.3 has been released with R33 ECU images for Type 2 boards (R32/Z32 ECU) added as well as extra images collected over the past year
30th of July, 2011
Website has been updated with ECU part lists added, extra modification documents for R33 Skylines (Z32 ECU install and using R32 GTR ECU in an R33 guide) and general information updates
ROM Pack 2.3 has been released with R33 ECU images for Type 2 boards (R32/Z32 ECU) added as well as extra images collected over the past year
More supported ECUs added
3rd of November, 2010
Added Y60 Patrol (TB42E) and Q45 Infiniti (VH45DE) 1990-1992 models to the Type 2 listing
Note that we do not support TB45DE ECUs as these do not facilitate a daughterboard
Later model Q45 Infiniti 16 bit ECUs (1993-1995 models) were unable to write to the Type 3 board on the bench so we are unable to support the later model ECUs and recommend using the earlier model ECU with Type 2 board
3rd of November, 2010
Added Y60 Patrol (TB42E) and Q45 Infiniti (VH45DE) 1990-1992 models to the Type 2 listing
Note that we do not support TB45DE ECUs as these do not facilitate a daughterboard
Later model Q45 Infiniti 16 bit ECUs (1993-1995 models) were unable to write to the Type 3 board on the bench so we are unable to support the later model ECUs and recommend using the earlier model ECU with Type 2 board
Supported ECUs added
27th of October, 2010
P11 Primera SR20DE and later model K11 CG10DE/CG13DE ECUs have been added to the supported Type 4 board listings
27th of October, 2010
P11 Primera SR20DE and later model K11 CG10DE/CG13DE ECUs have been added to the supported Type 4 board listings
Nistune Base Image Programmers updates
20th of October, 2010
Installation documents and NTProg software has been updated. These are available through the support pages on this website
20th of October, 2010
Installation documents and NTProg software has been updated. These are available through the support pages on this website
Nistune Type 5 development update
1st of October, 2010
Type 5 is still under development. With the completion of the USB base image programmer built to load images into these boards, we have been able to successfully program the board. However there are still some issues with getting the ECUs to work with the boards which are being looked into
1st of October, 2010
Type 5 is still under development. With the completion of the USB base image programmer built to load images into these boards, we have been able to successfully program the board. However there are still some issues with getting the ECUs to work with the boards which are being looked into
Type 4 OBD-II boards
1st of October, 2010
Our initial version of the Type 4 OBD-II board extended the previous Type 4 board with FLASH chips. We tested with S14 KA24DE OBD-II (1996 version) and it ran but had stability issues. We have now developed a second prototype which is undergoing testing using 4 x NVsRAM chips on the board
1st of October, 2010
Our initial version of the Type 4 OBD-II board extended the previous Type 4 board with FLASH chips. We tested with S14 KA24DE OBD-II (1996 version) and it ran but had stability issues. We have now developed a second prototype which is undergoing testing using 4 x NVsRAM chips on the board
Nistune USB Base Image Programmers
23rd of September, 2010
We now have available new Nistune USB Base Image Programmers!
These will be a replacement for the previous printer port versions
23rd of September, 2010
We now have available new Nistune USB Base Image Programmers!
These will be a replacement for the previous printer port versions
